Riser recliner chairs with a stylish twist
A lot of riser recliner chairs available for purchase today look old fashioned and are often unloved by new buyers. Manufacturers are lured into the trap of thinking that because their audience is largely made up of elderly persons, they should produce chairs that look dated and are basic in functionality. The truth is, most buyers are looking for more modern, design-led chairs that will offer them excellent comfort as well as mobility assistance.
Whilst there is still a place for traditional-style chairs, Alpine HC has developed a new range of riser recliner chairs that offer a stylish alternative. The range consists of 5 contemporary-style chairs with a wide range of options including motor types, upholstery materials, control types and upholstery colours. The range is proving popular with buyers seeking leisure and relaxation chairs as well as elderly and disabled people needing a chair for mobility support.
Seating is a major part of any care environment. An individual with limited mobility will spend the majority of their time in a chair, certainly in the lighter hours of the day. When choosing a chair such as a riser recliner, important considerations include pressure relief, design and durability. This section aims to educate and inform buyers, users and operators of seating for care environments.
Riser Recliner Chair Measurement
The size of a riser recliner chair and how well it fits the user is perhaps the most important consideration when looking to purchase. There are a lot of measurements to consider aside from just the overall and seat dimensions, such as the measurements of the backrest, seat height from floor, and the arm height. Whilst it is beneficial to try out a chair before you buy, finding a rise and recline chair that is the perfect fit is more than achievable if you assess comprehensive chair dimensions against the user's body sizing.
It is important that the supplier of the riser recliner chair provides you with comprehensive and detailed dimensions of the chair. The measurements you need to know are:
* Overall chair dimensions
* Seat width
* Seat depth
* Seat height (from floor)
* Backrest height (from seat)
* Armrest height (from seat)
The above measurements will give you a really good idea of the size of the chair. From here, you can measure the user's corresponding body measurements (e.g. compare the seat depth to the length of the user's thighs). Use the section below to learn more about measuring up the user to ensure a perfect fit.
Ensuring the Perfect Fit - Seat Depth
The depth of the seat on a riser recliner chair needs to support the full length of the thigh whilst leaving a small amount of room for comfort. Too short and the seat will increase localised pressure. Too long and the user will slide forward, causing postural problems. Ideally, when sitting on the chair, the user should have between 25mm (1″) and 50mm (2″) between the back of their legs and the chair. Compare the seat depth of the chair with the user by measuring the distance from the back of the user's hips, along their thighs, and to approximately 25mm (1″) before the back of their knees.
The width of the seat needs to ensure the user is well supported whilst also providing enough room for the user to shuffle themselves slightly when in the chair. We recommend that you allow a gap of 15-25mm (around 3/4″) on either side of the user's hips, this also ensures their arms sit comfortably on the armrests. Measure the user from one hip to another and compare this with the seat width of the chair.
The height of the seat is measured from the floor to the top of the seat. A higher seat improves the user's ability to get in and out of the chair, but their feet must be flat on the floor to ensure good posture. The best way to gauge the correct seat height is by measuring the distance from the floor to the back of the knees.
The backrest of a riser recliner should support the user's whole back, and when in a reclined position, their head as well. A backrest that is too short could result in the user's head hanging over the backrest when it is fully reclined which means they will likely slide forward into a poor postural position. Measure the user from the lowest point of their back to the middle point of their head, and ideally the backrest should be the same height.
The height of armrests is measured from the top of the seat to the top of the armrests. The greater this height the more supportive the chair will be, but if it is too high neck and shoulder strain can occur. Low height armrests can be preferable for eating and using a laptop computer as they are less obtrusive. However, low armrests make it more difficult for the user to get out of the chair. Measure the distance of the armrest height on an existing chair that the user finds comfortable and find a riser recliner chair with similar armrest measurements to that.
Riser Recliner Chair Upholstery
Upholstery is a very important part of a riser recliner chair and getting it right could be the difference between a chair you love and a chair you regret buying. There are plenty of options to consider and we recommend you read the selector guide below to ensure you make an informed decision.
Firstly, you need to be confident that the supplier of your riser recliner is using quality fabrics that are both comfortable and durable. Alpine HC partner with producers of high quality, care-grade materials (see specifications below). You also want to ensure the chairs are upholstered well. The last thing you you should expect from a chair is for poor fitting material and/or loose stitching, but it is common in cheaply made chairs. Buy from a supplier who guarantees quality, and ensure the warranty on the chair is at least 18 months.
Next you need to think about the sort of usage you want the upholstery to withstand. If you are using the chair for general leisure and relaxation for a few hours in the day, fabric upholstery will be fine. However, if you plan on eating meals and sleeping in the chair, you may want a more practical option such as a leatherette. A leatherette is a faux leather that is wipe clean, durable, and is far less absorbent of liquids spilled on the chair.
Then there is the comfort aspect of upholstery. Fabrics and cloths are naturally more comfortable as they are soft and have a lot more give. Leatherettes are firmer but are more supportive. Alpine HC use soft-touch faux leathers to ensure they are as comfortable as possible.
Thanks for reading. I hope you like Alpine HC's new range.